Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Snowbusman

Pages: [1] 2 3
1
I can"t believe no one wants to help! We have been asking around for a year now and only one response. We are asking for help and willing to pay............ da

2
Hello,
This is the two wheel slider system and I think it will work really well. I have seen a three wheel off -slider system also. Has any one heard any plus-minuses on either if the systems. I can't believe how hard it is to get information. You would think some one would jump at the opertunity to supply help!

3
General Discussion / Re: Interior pictures
« on: April 17, 2020, 03:19:25 pm »
Believe me, every one does their own thing!  Bob           

4
Drivetrain / Slide Suspension Replacing 1, 2 & 3 Wheels with a slider
« on: March 21, 2020, 02:36:02 pm »
Has anyone out there carried out this mod? A lot of machines in PQ have them installed.  Does some one sell these as a kit or supplies drawings. How does in work? Sure like to hear about them.  Bob

5
Metal Bombardiers / Re: Engine Door
« on: January 08, 2020, 04:58:53 pm »
Thank you Frank for replying.
The OEM Doors are  not very strong and we had louvered doors fabricated out west. Price was very good and made of much heavier material.
I can fill you in on my supplier if you want and send a picture of his product and our one door that has been re skinned. Take care and Happy New Year to you!@

6
Metal Bombardiers / Engine Door
« on: November 22, 2019, 03:01:52 pm »
Does anyone have a set of engine doors in good shape or know of a firm that can stamp out a set of new skins. The R/H door skin is especially bad.

7
V8 Engines / Re: 318 to 360
« on: October 02, 2019, 07:23:39 pm »
NO, No, NO,
The early 313/318 had forged cranks which did not need external balancing ( a Harmonic Balancer) The later engines need the HB. (Non Poly)
The flywheel balancing and torque converter balancing hand nothing to do with engine balancing!

8
General Discussion / Re: Factory power steering
« on: June 13, 2019, 05:54:17 pm »
Hi,
I have been told by pump rebuilders that the out put of a Chrysler Power Steering pump was around 1000PSI. It is hard to get specs out of the manufactures. About the only way to get reliable information is to do it yourself. Are you having a blowing seal issue or ?
You could always fab up a pressure relief system>
Bob

9
Wanted / Re: Wanted 727 transmission
« on: April 13, 2019, 05:25:22 pm »
The Parking brake drum was used by Chrysler in the early 60's ( 60-63)just before the "P" was developed where they locked the transmission internally for parking.
. I have that early arrangement and I wished I had gone to the next generation 727. The simple reason is that the drum brake will require adjustment while in service. You also have to fabricate the floor with a hump for that drum.

There are plus's and negatives. AT least the drum brake gives the operator a foot brake and an Emergency brake option.

With the 727 fitted to an early machine one would have to fabricate a braking system which I don't think would be hard.

10
Transmissions / Re: 727 tf neutral safety switch
« on: April 13, 2019, 05:12:07 pm »
Hi Guys,
Just catching up on this subject and very excellent replies. If you are feeling that much vibration that you are feeling it at low RPM's I would suspect an installation problem just like what has already been mentioned, part in compatibility, alignment, worn pilot hole (which I have seen ) or worn out parts. Its difficult to analyse and work through through it! Been there myself1

11
Metal Bombardiers / Re: Power Steering for R Models
« on: April 10, 2019, 03:28:49 pm »
Hi Everyone, I decided to go ahead with the conversion and did a lot of shopping. There are a lot of Torque Generators for sale on different shopping sites but look for vendors that have models that are still in production so parts are readily available, These items are used a lot in farm machinery and industrial applications so look in those sites!
Bob

12
Transmissions / Re: 727 tf neutral safety switch
« on: March 02, 2019, 07:58:01 pm »
The safety switch is a very simple method to signal you in the drivers seat that the transmission is in neutral via of an indicator lamp and also supply a ground to the starter relay so the start button can be pushed with results. The Neutral switch should be two connections, make and break, with one side going to ground!
If you switch is three terminal then I suspect one post is to run forward for the indicator lamp. Hope I helped. I am available for additional help!
Bob

13
V8 Engines / Re: Exhaust
« on: January 03, 2019, 05:24:41 pm »
Hi, May I ask why to convert out the back? I have the original exhaust in my 313 (1963)
Snowbusman
Bob

14
General Discussion / Outstanding Support and Communication
« on: January 03, 2019, 05:17:43 pm »
I would just like to say thank you to the guys that have been helping me with my Power steering and Window questions. Without Northern Tracks this would have been an almost impossible task.
 Keep up the great work and we all will have a better understanding of our machines and make them better for years to come.
Thanks
Snowbusman 

15
I have been going back looking at old post and this one really caught my eye!
 There is a picture of the original pin stripping that was applied when the machines were delivered---Amazing!
I feel this machine was worth saving and I don't think not too much money. Is the project still alive? Snowbusman

Pages: [1] 2 3