Northern Tracks Forum

Performance Forums => Drivetrain => Topic started by: the old trucker on August 26, 2008, 05:55:01 am

Title: Two speed rear end
Post by: the old trucker on August 26, 2008, 05:55:01 am
    Do you think a two speed rear end would be any good for these old bombers ? I remember when i first drove a truck with the ruxel button on the stick. Thought I was king of the road back then.
   It gave you a good starting gear, plus it allowed you to move up by half a gear @ a time, rather than trying to go that full gear & lose it all. Instead of five, you had ten gears. I found them great.
   In my last truck I tried an 18 speed. Easier on the clutch, trans, & rear ends. There were so many options I had for power or speed.
   Just thinking out loud again. Anybody got some pros & cons about this setup???
Title: Re: Two speed rear end
Post by: sav_x69 on March 28, 2012, 04:12:38 pm
this idea would give you more gear ratios for bombers with less hp, but 400 horses will pull pretty much anything!
Title: Re: Two speed rear end
Post by: fisher on March 29, 2012, 08:09:53 am
Will they work with automatic transmissions?
Title: Re: Two speed rear end
Post by: the old trucker on March 29, 2012, 09:07:16 am

 I'm not sure about automatics. Back in the day, late 60's early 70's, the 2-5 ton trucks were shifted with the ruxel button on the stick. I used the fuel & clutch, it all depended on if your going up or down the gears. If you had an automatic you may get away with working the fuel....   
Title: Re: Two speed rear end
Post by: the old trucker on March 29, 2012, 09:33:43 am
 Here is how you shifted the 5 speed with ruxel. Note the difference in 4th & 5th gears. There were times when the ruxel would screw up when out on the road, so I'd have to get a small stick & jam it in the ruxel housing, keeping it in lo or hi..... It got me home.   

 Gear   Ruxel

  1-     lo to hi

  2-     lo to hi

  3-     lo to hi

  4-5   lo

  4-5   hi
Title: Re: Two speed rear end
Post by: sav_x69 on March 29, 2012, 04:23:59 pm
There is a product that dose a similar thing called gearvendors they bolt to the transmission and split the gears for you, so every gear essentally has an overdrive.The only drawback is its like $3000!
Title: Re: Two speed rear end
Post by: the old trucker on March 30, 2012, 08:23:49 am
There is a product that dose a similar thing called gearvendors they bolt to the transmission and split the gears for you, so every gear essentally has an overdrive.The only drawback is its like $3000!

 Wouldn't that change gear ratio in the trans & keep the same ratio in the diff ?? With 2 speed ruxel it changed gears in the diff. I don't know much about it but I want to learn...

                                                                      A NOSEY OT.
Title: Re: Two speed rear end
Post by: sav_x69 on March 31, 2012, 06:28:16 am
Yes gear vendors  is a gear splitter so the rear end Ratio stays the same and it splits your tranny gears up for a more usable torque band  and fuel economy.I would essentally turn your 3 speed to a 6 speed tranny.