Author Topic: NEW MEMBER COMING SOON...  (Read 30113 times)

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #45 on: January 27, 2013, 03:39:19 pm »

  I should have said that he used the space saver rim....
after covering a few acres of prime real estate.

Offline Walrus

  • Newbie
  • *
  • Posts: 49
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #46 on: February 03, 2013, 02:12:55 pm »
According to my Local NAPA, fuel pump for 251 flat head are obsolete. I guess I'll just go with electric. Got my carb kit, one wire alternator, had to order the fuel pump, should have that Monday. Weather guys are saying in 7 days it looks like a warming trend, might get something done on the ol' girl :D

Offline Averyman

  • Jr. Member
  • **
  • Posts: 86
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #47 on: February 03, 2013, 11:01:33 pm »
NAPA #588

Offline Cranman

  • Full Member
  • ***
  • Posts: 153
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #48 on: February 04, 2013, 01:45:46 am »
If you can\t get it from NAPA, try another Dodge part source and ask for a pump for a 1965 Dodge WM300. If you ask for 1940's pump they assume it is not available.

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #49 on: February 04, 2013, 08:19:39 am »

   Here's a couple of places to try.
 
        Vintage Power Wagon. (not sure of address)

        Roberts Motor Parts.  ( in Mass.)

  Oldsledz may have their ph. numbers.
   
   Here's another,

 Dodge City Truck Parts
    RR # 5.,
    Sunderland, ONT.,
    L0C  1H0
    Phone-905-985-0869
    Fax - 905-985-9255


       
       
after covering a few acres of prime real estate.

Offline Walrus

  • Newbie
  • *
  • Posts: 49
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #50 on: February 09, 2013, 03:55:26 pm »
Too bad the old girl isn't running, got 2 feet of snow since last evening and its still coming. I'll bet Old Trucker is getting it also

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #51 on: February 09, 2013, 05:34:36 pm »

   10/4 on the SNOW.... It's been coming down for 4 hrs. now. Good thing there's no wind with it...      OT.
after covering a few acres of prime real estate.

Offline Walrus

  • Newbie
  • *
  • Posts: 49
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #52 on: February 10, 2013, 08:54:04 am »

   10/4 on the SNOW.... It's been coming down for 4 hrs. now. Good thing there's no wind with it...      OT.
No wind? Boston had a 91 mph gust, we had them in the 70s here in Maine. Ended up with about 2 ft here but So. Maine had as much as 3 ft. :o

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #53 on: February 10, 2013, 11:05:12 am »

   We have about 18" & the wind has started to pick up. No sense blowing snow yet...

                                                                                                                        OT.
after covering a few acres of prime real estate.

Offline Jbuck

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #54 on: March 03, 2013, 01:04:15 pm »
Hey folks....earlier in this thread it was mentioned that there was distributors in the Edmonton area for the aluminum rims.   Could someone please supply a name and contact number if possible.  Thanks

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #55 on: March 03, 2013, 01:28:52 pm »

  Look up General Discussions. click on    "New Parts Suppliers List". Look for Shaver & Sons. I heard they were thinking about selling them. All their contact info is there...

                                                                                                OT.
after covering a few acres of prime real estate.

Offline viking

  • Jr. Member
  • **
  • Posts: 64
    • View Profile
New Alpine Tire
« Reply #56 on: March 03, 2013, 03:39:40 pm »
Just installed the first one on a Narrow Gauge. Clearly a more vertical profile, this tire does not touch the inside edge of the track. Centres easily in the cleat cup.
There is 3/8"s to 1/2" clearance on both sides. All the other Dunlops appear to rubbing slightly.
Rated at 70 psi, Dunlops are rated at 35 psi and is usually where I run them.
I think a less jarring softer ride in loaded conditions, they do need regular air pressure checks.
I have the new rim, waiting on an excluder retrofit.
Gimli, where men are men and fish are scared!

Offline Jbuck

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #57 on: March 03, 2013, 07:51:33 pm »
Thanks OT......but I would still like to find the name of an Edmonton distributor...(big savings on shipping=more money to buy goodies for bombardier)

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #58 on: March 03, 2013, 08:18:53 pm »

  I think there is a place down south that sell them, but that's even further away for shipping. Plus the time you deal with customs & duty, it all adds up.
                                                                                        OT.
after covering a few acres of prime real estate.

Offline Walrus

  • Newbie
  • *
  • Posts: 49
    • View Profile
Re: NEW MEMBER COMING SOON...
« Reply #59 on: March 16, 2013, 04:09:29 pm »
Been too cold to do anything outside on the R12, a neighbor of mine is a glass guy, the windshield is falling out and has been butchered to keep it in place. I got him to come over and he is getting the proper rubber gasket material, hopefully next weekend he'll be over to put it in. I told him to wait till its warmer, supposed to be 7 tonight so.... Glass breaks easy when its cold. Can't wait to get that fixed so I can take the tarp off. I have all the tune up parts including 12v one wire alt. and 12 v fuel pump. One weekend and I think I can get it running but its got be warm ;D