Author Topic: EFI engine  (Read 5966 times)

Offline FORD F-150

  • Full Member
  • ***
  • Posts: 154
    • View Profile
EFI engine
« on: February 28, 2012, 06:29:52 pm »
has anyone ever put in an EFI engine in a bomber? if so, what kind of engine and do you have pics of it??

FORD F-150

Offline kpm

  • Sr. Member
  • ****
  • Posts: 271
    • View Profile
Re: EFI engine
« Reply #1 on: February 28, 2012, 06:48:26 pm »
...when installing an EFI,you need the computor the motor came with and the wiring harness,plus a high volume fuel pump that goes inside your gas tank...
                                                                         sorry no pics
                                                                                              kpm

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: EFI engine
« Reply #2 on: February 28, 2012, 07:08:33 pm »

   I could have gotten an EFI engine for free last fall. I think it was all there, but I was after getting the 300 I have now. Some people say they work better.
                                                                        OT.
after covering a few acres of prime real estate.

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: EFI engine
« Reply #3 on: February 29, 2012, 04:37:45 am »

 I should have said that the free EFI engine was a Ford 300. The 300 I have in my machine is carburated.
after covering a few acres of prime real estate.

Offline kpm

  • Sr. Member
  • ****
  • Posts: 271
    • View Profile
Re: EFI engine
« Reply #4 on: February 29, 2012, 11:38:41 am »
hmmm,as far as working better Claude....I kinda sorta doubt it....as the efi gives you calibrated performance...the carb model 300's are great though and far less hassle to install.
  The 300 six because of i's long stroke,,,produces as much torque..sometimes more than alot of the small v8's...
          kpm

Offline gror

  • Jr. Member
  • **
  • Posts: 53
    • View Profile
Re: EFI engine
« Reply #5 on: February 29, 2012, 06:06:53 pm »
I am considering on converting my 300 to EFI, I dont think it would be to hard to do.

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: EFI engine
« Reply #6 on: March 01, 2012, 08:51:51 am »

  Ya know Gror it was only yesterday while I was looking around the net when I thought about Swamp Dwag. I think he was asking something about different manifolds for more power. Well I looked it up & found out that you could put a 2 barrel carb on the original manifold with a bit of machining. It also talked about changing a carbed 300 to a EFI 300. I'll have another look to see if I can find it again & post it here. It's good to hear from you again.

                                                           One old trucker trying to get back at it.......
after covering a few acres of prime real estate.

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: EFI engine
« Reply #7 on: March 01, 2012, 10:02:58 am »
 
 Gror check this out. Here is a site that might help, 1967 to 1996 ford.

   I googled this  ( convert 300 carbed ford to 300 EFI ) & came up with this...

   forums.off-road.com › Ford › Ford 67-96 F-Series, 78-96 Bronco

  Let me know if it don't work.    OT.
after covering a few acres of prime real estate.