Author Topic: 48bomber  (Read 31652 times)

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: 48bomber
« Reply #30 on: January 27, 2010, 08:08:37 pm »
after covering a few acres of prime real estate.

Offline BIGDAVE

  • Newbie
  • *
  • Posts: 37
    • View Profile
Re: 48bomber
« Reply #31 on: January 27, 2010, 08:19:50 pm »
Thanks OLD trucker.  It looks alot like 48bomber's and Houlio's.  These pics were taken this month at a vintage snowmobile ride near McGreger,MN.  Will get more pics of details when it gets out of garage. Have been researching cause for differential whine. Ideas?
                                         BIGDAVE

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: 48bomber
« Reply #32 on: January 27, 2010, 08:36:24 pm »

   I had my diff to a specialist here. Mine has some slight play, or slop in it. If I use it like it is, they say I'll hear a whining noise all the time on account of the slack in the crown & pinion & a chip off one of the pinion gears. I've had three local mechanics here look at it & they think with new bearings & seals, & (80/90 gear oil ??), it should be OK. I know very little about this stuff myself . 
after covering a few acres of prime real estate.

Offline 48bomber

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
Re: 48bomber
« Reply #33 on: January 27, 2010, 09:22:03 pm »
Thanks for the pictures!  It looks just like mine , only in a little better exterior condition.
On the trips out with mine I cant hear the differential at all. The tracks make some noise on the sprockets , but minimal. The engine is where the majority of the noise comes from in the cab ,but is not loud enough to bother.
  The diferential can be checked for play by taking the u joint off by the diff, and taking the tracks off the sprockets.
check the axcel play and seals behind the sprockets ,turn the drive end to see if there is any play in the bearing end. I was told by a mechanic the play turning back and forth should be a 1/16 turn.As well the mechanic turned mine with a screw driver against his ear  and to the diff housing to listen for noises within like several teeth broken etc. The amount these machines are used ,a little play wont hurt as long as the bearings are good.Change the oil.
  I am no expert  but this is what a mechanic did for me .
48bomer

Offline BIGDAVE

  • Newbie
  • *
  • Posts: 37
    • View Profile
Re: 48bomber
« Reply #34 on: January 28, 2010, 08:26:42 pm »
I posted more pics on photobucket.    It's still in the garage!!!  BIGDAVE  "http://s900.photobucket.com/albums/ac210/BIGDAVE2_2010/pictures/?action=view&current=1948Bombardier1.jpg"
« Last Edit: January 28, 2010, 08:33:04 pm by BIGDAVE »


Offline jockochoko

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: 48bomber
« Reply #36 on: February 08, 2010, 07:08:34 pm »


         That looks like it is coming along nice big dave. Thanks for posting the bomber.
                  Thanks, Jockochoko

Offline BIGDAVE

  • Newbie
  • *
  • Posts: 37
    • View Profile
Re: 48bomber
« Reply #37 on: February 08, 2010, 08:03:57 pm »
That's BIGDAVE all caps, no space.  johnson all lower case.  BIGDAVE littlejohnson .  Bring yourself over here and learn something about your machine.  A thousand words are worth a picture! You with your hands greasy, priceless!   My grand daughter's pic is at my photobucket acct.  She'll be driving it B4 you will.  BIGDAVE j

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: 48bomber
« Reply #38 on: April 26, 2010, 03:18:29 pm »
Hey All,
  Today I took off the front wheels and installed the skis back on. Then we went around the yard in the fresh snow from Wed. This is going to be alot of fun this winter out on the trails!!!!
   48bomber
   
48bomber, do you have an adapter for the front wheels. This is the first time I heard of putting wheels on the front of a woody. Any pics floating around for an old trucker to look at ??
after covering a few acres of prime real estate.

Offline 48bomber

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
Re: 48bomber
« Reply #39 on: May 02, 2010, 08:32:22 pm »
Hi all,and OT,
  Its been a bit from my last post.  The wheels were made up to fit in the pin holes for the ski. The wheels are small tires from a conveyor belt from a mine. Only about the size of a kids wagon tire. It will not turn very well , but atleast the machine can be moves around during the summer. I have no pics of them but can get some when I put them on if you like.
  48bomber

Offline 48bomber

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
Re: 48bomber
« Reply #40 on: May 21, 2010, 03:43:15 pm »
Has anyone put power steering on a bomer like mine ? Any pics info would be great!
  48bomber

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: 48bomber
« Reply #41 on: May 22, 2010, 07:13:40 am »

   48bomber, look up general discussion.. page 2, second last one down. It's called "adding power steering"
                                                                       OT.
after covering a few acres of prime real estate.

Offline 48bomber

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
Re: 48bomber
« Reply #42 on: November 18, 2010, 09:50:46 pm »
Hey all,
  Hope all is well with everyone!  I am a little excited tonight , as its snowing!!
  Battery  charged for the B12 , and ready for install. The local santa clause parade is Sat night ,and the local snowmobile club will have it in the parade on a trailer!!
  Its a night parade with lights on the floats. Should be fun , and i will get pics .
  Hope we get some good posts started as it tis the season!!!!
   48bomber

Offline the old trucker

  • Hero Member
  • *****
  • Posts: 1461
    • View Profile
Re: 48bomber
« Reply #43 on: November 19, 2010, 04:35:10 am »


   48Bomber I was talking to Glen, (the fellow that's building a bomber from scratch), & he's talking about some kind of in line valve that might work in this case. I will keep an eye on this.
   I'm surprised that the people that know & have woody's with power steering haven't helped us out.

                                                             48bomber & OT needing to be steered straight....   
after covering a few acres of prime real estate.

Offline 48bomber

  • Jr. Member
  • **
  • Posts: 59
    • View Profile
Re: 48bomber
« Reply #44 on: November 19, 2010, 09:26:40 pm »
ot,
 I have no idea about the power steering in the wood , narrow guage. I hope someone has built one and can help us.
   48bomber